/hub/devices/raspberry-pi-5

Raspberry Pi 5

The Pi 5 entries are external references, not Trevor’s matched rerun. They stay visible because they explain the original Nova comparison, but they do not belong on a controlled cross-device leaderboard.

3
records
0
published measurements
0
retained failures
1
test groups

System in this record

Processor
Broadcom BCM2712, 4 Cortex-A76 cores at 2.4 GHz
Memory
16 GB configuration referenced in the Nova article
Storage
Comparable storage cost discussed in the Nova article
Cooling
Not measured by Trevor in this result set
Software
Raspberry Pi OS and llama.cpp in cited published references

External references cited in the Nova article.

Full tests

External reference2026-04-10

Raspberry Pi 5 Published Reference Rows

The values quoted in the Nova article remain ranges or cited results. They are kept separate from Trevor-measured rows and are not converted into invented exact midpoints.

Open full test

Every retained row

Results on Raspberry Pi 5

Model and artifactRuntime and modeGenerationPromptPeakStateFull test
DeepSeek-R1 Distill Qwen 1.5B
Q4 reference
llama.cpp
CPU · Published reference range
about 6 to 8 tok/sn/an/aExternal referencePi 5 references
Open result details

Why this model is here

The Nova NPU run started at 11.5 tok/s, then the state-capitals answer degraded into invented cities.

It is the clearest example in the Hub of why throughput and useful output cannot be treated as the same result.

What ran

Q4 reference ran through llama.cpp using CPU in Published reference range mode on Raspberry Pi 5.

Approximate published range. Not Trevor-measured.

Recorded setup

The full test page contains the shared controls and comparison boundary for this row.

Qwen 2.5 3B Instruct
Q4 reference
llama.cpp
CPU · Published reference range
about 4 to 5 tok/sn/an/aExternal referencePi 5 references
Open result details

Why this model is here

The Nova NPU result reached 7.0 tok/s and returned all 50 state capitals correctly.

It was slower than the smaller DeepSeek row but produced the useful answer on the shared prompt.

What ran

Q4 reference ran through llama.cpp using CPU in Published reference range mode on Raspberry Pi 5.

Approximate published range. Not Trevor-measured.

Recorded setup

The full test page contains the shared controls and comparison boundary for this row.

Llama 3.1 8B Instruct
Q4 reference
llama.cpp
CPU · Jeff Geerling published result
1.99 tok/sn/an/aExternal referencePi 5 references
Open result details

Why this model is here

The Nova NPU measured 3.72 tok/s. A separate 1.99 tok/s Pi 5 value remains labeled as an outside reference.

It connects Trevor-measured Nova data with a clearly separated published Pi reference without presenting the two methods as a matched hardware contest.

What ran

Q4 reference ran through llama.cpp using CPU in Jeff Geerling published result mode on Raspberry Pi 5.

Cited result. Not Trevor-measured.

Recorded setup

The full test page contains the shared controls and comparison boundary for this row.

© 2026 Trevor Unland. All rights reserved.

RSS Feed

$ echo "Built with React + TypeScript"